1. Performance parameters of press-free SSIC roller
Roller material: non-pressure sintered silicon carbide roller;
Working temperature: 1900℃;
Working pressure: 0.3-5Mpa;
Product density: 3.12g/cm³;
Product porosity: < 0.07;
SIC content: > 99%;
Free SI content: < 0%;
Thermal conductivity: 140W/m.k;
Mohs hardness: 9 (second only to diamond)
Matching products: Cordierite Mullet SLATE; Oxide silicon carbide plate;
Connection mode: inner hole interpenetration;
Specification model: 30--120mm;
Scope of application: sanitary ware kiln, nitrogen protection kiln, high voltage electric porcelain kiln, daily ceramic kiln, grade A light foamed ceramics, 1260℃ ceramic roller kiln;
Roller advantages: effectively reduce the weight of kiln car, prolong the service life.
Two, non-pressure SSIC roller application field
Sintered silicon carbide roller rod, ceramic roller rod, silicon carbide square tube are widely used in tunnel kiln, roller kiln, natural gas kiln, electric furnace wire kiln, silicon carbon rod electric kiln and so on.
Third, the performance of silicon carbide beam, silicon carbide square beam, silicon carbide square tube
The silicon carbide beam, silicon carbide square beam and silicon carbide square tube have good strength and material characteristics, and the bearing capacity of tunnel kiln, roller kiln, natural gas kiln, electric furnace wire kiln and silicon carbon rod electric kiln is good within 1350℃.
Fourth, non-pressure SSIC roller material advantages
Non-pressure sintered silicon carbide roller rod, silicon carbide round tube, silicon carbide square tube is a new ceramic material, with high temperature resistance, oxidation resistance, high strength, extreme cold and heat resistance, good thermal shock resistance, low temperature, good thermal conductivity, wear resistance, corrosion resistance and other characteristics. As an energy-saving refractory material in sanitary ceramics, daily porcelain, electric porcelain, magnetic materials, microcrystalline stone, powder metallurgy, steel heat treatment and other industries of high temperature kiln is widely used, made of silicon carbide components are gradually used in power generation, paper, petroleum, chemical industry, mechanical seal, water pump, surface treatment, heat exchange, mineral processing, aerospa
Bearing Capacity of Rbsic(Sisic)Beams
|
Size of section(mm ) |
Wall Thickness(mm) |
ConcentratedLoading(Kg) |
Uniformly DistributedLoading(Kg) |
|||
|
B side |
H side |
B side |
H side |
B side |
H side |
|
|
30 |
30 |
6 |
76 |
76 |
152 |
152 |
|
40 |
50 |
6 |
225 |
195 |
450 |
390 |
|
30 |
60 |
6 |
240 |
145 |
480 |
290 |
|
40 |
60 |
6 |
300 |
230 |
600 |
460 |
|
50 |
60 |
7 |
400 |
350 |
800 |
700 |
|
50 |
70 |
8 |
530 |
430 |
1060 |
860 |
|
50 |
80 |
8 |
650 |
490 |
1300 |
980 |
|
60 |
80 |
10 |
915 |
740 |
1830 |
1480 |
|
60 |
90 |
10 |
1100 |
825 |
2200 |
1650 |
*The above parameters are calculated according to the length of one meter
Data of Silicon Carbide(SlSlC )
|
ltem |
Unit |
Data |
|
MaxTemperatureof Appllcation |
℃ |
≤1350 |
|
Density |
G/cm3 |
≥3.02 |
|
open porosity |
% |
<0.07 |
|
Bending Strength |
Mpa |
250(20℃) |
|
Mpa |
280(1200℃) |
|
|
Modulus ofElasticity |
Gpa |
330(20℃) |
|
Gpa |
300(1200℃) |
|
|
Thermal Conductlvity |
W/m.k |
45(1200℃) |
|
Coefficient of Thermal Expansion |
K-1×10-6 |
4.5 |
|
Mohs Hardness |
9 |
|
|
Acid Alkaline-proof |
Excellent |
Loading Capacity of Rbsic(Sisic) Rollers
|
Size of section (mm ) |
Wall Thickness (mm) |
ConcentratedLoading(Kg) |
Uniformly Distributed Loading(Kg) |
|
30 |
5 |
43 |
88 |
|
35 |
5 |
63 |
126 |
|
38 |
5 |
77 |
154 |
|
40 |
6 |
97 |
194 |
|
45 |
6 |
130 |
260 |
|
50 |
6 |
167 |
334 |
|
55 |
6 |
202 |
404 |
|
60 |
7 |
283 |
566 |
|
70 |
7 |
405 |
810 |
* The above parameters are calculated according to the length of one meter
FAQ
Do you want to place an order with us now?
Please contact: Wang Jianzhong 13571957961, zhwesic@163.com
|
Question 1: Can you make this product? |
|
Hello, we need to evaluate based on 2D or 3D drawings in order to provide you with an accurate response after reviewing the drawings. |
|
Question 2: Can we provide a testing report according to our requirements? Can you send me some samples by mail? |
|
Yes, we can provide free samples, but the shipping cost will be borne by you. |
|
Question 3: What is your minimum order requirement? |
|
Our minimum order quantity is 100 kilograms. But usually we accept smaller quantities, such as 100 grams, on the condition that the sample fee, packaging fee, and shipping fee are 100% paid by you |
|
Question 4: What is the delivery time? |
|
Delivery time: For some products, we have inventory and usually accept customized orders. The specific delivery time varies depending on the order. |
|
Question 5: Do you have any discounts? |
|
Different quantities have different discounts. |
|
Question 6: How do you handle quality complaints? |
|
Firstly, we will reduce quality issues to near zero through quality control. If there is a real quality issue, you can take a photo and record it when opening the box, and contact us in a timely manner. We will promptly resend qualified products for you. |
|
Question 7: How to start the order or payment? |
|
After both parties confirm the drawings, we can sign the contract, and we will attach our bank information in the contract. The payment method can be wire transfer. |
http://www.zhwe-ceramics.com/