Product Details

◎The basic structure of the switchgear is assembly by C-shaped profile. C-shaped profile is bent by steel plate with modular mounting hole of E=25mm. All shelves and inner partitions are treated with galvanized purification; door and side panels are treated with high-pressure electrostatic spray.

◎Power distribution center cabinet (PC): Emax, MT, 3WN, AH and ME series circuit breakers can be used.

◎Motor control center cabinet (MCC): assembled by drawers of different sizes, the main circuit breakers use moulded-case circuit breaker of high breaking capacity or rotary switch with fuses. Power factor automatic compensation cabinet (it has manual, automatic and remote power factor compensation device).

◎The withdrawable MCC cabinet is divided into three compartments, namely the horizontal bus chamber behind the cabinet, the functional unit chamber on the front left of the cabinet and the cable chamber on the front right of the cabinet. The horizontal bus chamber and the functional unit chamber are separated by functional plates made of flame-retardant foamed plastic. The cable chamber, the horizontal bus chamber and the functional unit chamber are separated by steel plates.

◎When drawer unit is in place, it must act in strict accordance with the operation switch function and its position, otherwise structural components are easy to be damaged, please pay attention to it during operation.

This series of Low-voltage Withdrawable Switchgear is a combined type cabinet (FBA) assembled

Service conditions

◎ Ambient airtemperature should be within -5°C~+40°C, average temperature within 24h should not exceed +35°C.

◎ Atmospheric conditions: air should be clean. Relative humidity should not exceed 50% at +40°C, higher relative humidity is allowed at lower temperature condition, for instance, 90% at +20°C, please take measures for the dew produced on the product caused by temperature change occasionally.

◎ Altitude: not exceed 2000m.

◎ Ambient temperature for storage and transportation: -25°C~+55°C, short time (usually not beyond 24h) highest temperature not exceed 70°C. The product should not be subject to any irreversible damage underthe extreme temperature and should be able to work normally underthe normal conditions.

We can deliver the goods by air or sea. We can provide you with a good shipping company to facilitate your choice  Our delivery date is usually 15 to 20 days. If you need special customization, the time may be increased

Standard wooden boxes for outer packing

(1) 1 plastic bag/set

If you need specially customized package, please inform us in advance

http://www.setnelectric.com/